What makes solvent-based resin demanding to pump
- High viscosity, which rises further in the cold: the pump is sized on the viscosity at the lowest working temperature.
- Flammable vapours: compatible seals and verification of the ATEX classification of the area.
Send us the data of your solvent-based resin: we reply within 24 hours with the right pump.
Recommended configuration

Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines.
| Recommended series | Series NAV, Series ZV |
|---|---|
| Flow range of these series | 0.47 – 2,770 l/min (450 rpm up to each model's maximum speed) |
| Pump body | Cast iron; stainless steel where required |
| Heating | Not needed in normal conditions; to be considered if viscosity rises too much in the cold |
| Rotation speed | Low, towards 450 rpm |
| Shaft seal | Compatible with the solvent |
| ATEX | Zones 1, 2, 21, 22 · T1–T4, to be checked on the area classification |
| Connections | NAV: UNI flanges DN 40–DN 125 PN 16 ZV: threaded, flanged to the motor |
| Direction of rotation | Reversible |
Indicative configuration: we confirm it on your viscosity, temperature, flow and pressure data.
Send us the data of your solvent-based resin: we reply within 24 hours with the right pump.
Where it is used
Data we need for the quote
- Fluid and, if available, its technical or safety data sheet
- Required flow rate (l/min or m³/h)
- Viscosity at the lowest working temperature
- Discharge pressure and suction conditions
- ATEX zone classification
Only the fluid, flow and your email are required: we can complete the rest together.
Send us the data of your solvent-based resin: we reply within 24 hours with the right pump.
Frequently asked questions
Which pump do you recommend for solvent-based resin?
An external gear pump: Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines. The final configuration depends on viscosity, temperature, flow and pressure.
Can the pump be installed in an ATEX area?
Yes: our ATEX technical file is archived with TÜV and pumps are supplied for zones 1, 2, 21 and 22, temperature classes T1 to T4. Tell us the zone and send the safety data sheet: we verify the configuration.
Is the pump reversible?
Yes, NAV, ZV and CR pumps can run in both directions: useful for emptying lines back into the tank.
How quickly do you reply?
Within 24 hours, with the recommended pump, configuration and price. You can also write to us on WhatsApp.