What makes resin demanding to pump
- High viscosity, which rises further in the cold: the pump is sized on the viscosity at the lowest working temperature.
Send us the data of your resin: we reply within 24 hours with the right pump.
Recommended configuration
Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines; Series CR when the product must be kept hot.
| Recommended series | Series NAV, Series ZV, Series CR |
|---|---|
| Flow range of these series | 0.47 – 4,292 l/min (450–1,450 rpm) |
| Pump body | Cast iron; stainless steel where required |
| Heating | Not needed in normal conditions; to be considered if viscosity rises too much in the cold |
| Rotation speed | Low, towards 450 rpm |
| Shaft seal | Chosen on the safety data sheet |
| ATEX | On request |
| Connections | NAV: UNI flanges DN 40–DN 125 PN 16 ZV: threaded, flanged to the motor CR: per model, with jacket connections |
| Direction of rotation | Reversible |
Indicative configuration: we confirm it on your viscosity, temperature, flow and pressure data.
Send us the data of your resin: we reply within 24 hours with the right pump.
Where it is used
This page also covers: Acido e resina, Resina organica, Resina metalchetone.
Data we need for the quote
- Fluid and, if available, its technical or safety data sheet
- Required flow rate (l/min or m³/h)
- Viscosity at the lowest working temperature
- Discharge pressure and suction conditions
- Mains voltage and frequency (50/60 Hz)
Only the fluid, flow and your email are required: we can complete the rest together.
Send us the data of your resin: we reply within 24 hours with the right pump.
Frequently asked questions
Which pump do you recommend for resin?
An external gear pump: Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines; Series CR when the product must be kept hot. The final configuration depends on viscosity, temperature, flow and pressure.
Is the pump reversible?
Yes, NAV, ZV and CR pumps can run in both directions: useful for emptying lines back into the tank.
How quickly do you reply?
Within 24 hours, with the recommended pump, configuration and price. You can also write to us on WhatsApp.