
Construction
- Self-priming and reversible.
- Pump body in cast iron, and also in stainless steel.
- Heating jacket wrapping the whole pumping chamber, heated with thermal oil: no cold spots.
- Ten models from 32.3 to 2,960 cm³/rev, UNI flanges from DN 25 to DN 150.
- Speed up to 1,450 rpm for the models up to 1 1/2 CR, up to 950 rpm from 2 CR to 4 CR, up to 750 rpm for the 6 CR, depending on the viscosity of the fluid.
Heating
The jacket is connected to the plant thermal oil circuit. Where there is no thermal oil plant, see the alternatives in pump heating.
Typical fluids
Hot-melt, Rosin, Paraffin wax, Polyethylene wax, Liquid phthalic anhydride, Prepolymer.
Send us your fluid data: we reply within 24 hours with the right pump.
The models
3/4 CR-a32.3 cm³/rev · 30.7 l/min at 950 rpmUNI flanges DN 25 PN 40 · 17 kgUp to 1,450 rpmQuote for this model
3/4 CR-b50.4 cm³/rev · 47.9 l/min at 950 rpmUNI flanges DN 25 PN 40 · 19 kgUp to 1,450 rpmQuote for this model
3/4 CR-c70.7 cm³/rev · 67.2 l/min at 950 rpmUNI flanges DN 25 PN 40 · 22 kgUp to 1,450 rpmQuote for this model
1 CR127 cm³/rev · 121 l/min at 950 rpmUNI flanges DN 32 PN 16 · 22 kgUp to 1,450 rpmQuote for this model
1 1/2 CR297 cm³/rev · 282 l/min at 950 rpmUNI flanges DN 40 PN 16 · 48 kgUp to 1,450 rpmQuote for this model
2 CR503 cm³/rev · 478 l/min at 950 rpmUNI flanges DN 50 PN 16 · 64 kgUp to 950 rpmQuote for this model
2 1/2 CR754 cm³/rev · 716 l/min at 950 rpmUNI flanges DN 65 PN 16 · 72 kgUp to 950 rpmQuote for this model
3 CR1,005 cm³/rev · 955 l/min at 950 rpmUNI flanges DN 80 PN 16 · 85 kgUp to 950 rpmQuote for this model
4 CR1,910 cm³/rev · 1,814 l/min at 950 rpmUNI flanges DN 100 PN 16 · 220 kgUp to 950 rpmQuote for this model
6 CR2,960 cm³/rev · 2,812 l/min at 950 rpm *UNI flanges DN 150 PN 16 · 290 kgUp to 750 rpmQuote for this modelModel table
| Model | Displacement cm³/rev | l/min at 450 rpm | l/min at 950 rpm | l/min at 1,450 rpm | Max rpm | Connections | Weight | |
|---|---|---|---|---|---|---|---|---|
| 3/4 CR-a | 32.3 | 14.5 | 30.7 | 46.8 | 1,450 | UNI DN 25 PN 40 | 17 kg | Quote |
| 3/4 CR-b | 50.4 | 22.7 | 47.9 | 73.1 | 1,450 | UNI DN 25 PN 40 | 19 kg | Quote |
| 3/4 CR-c | 70.7 | 31.8 | 67.2 | 102 | 1,450 | UNI DN 25 PN 40 | 22 kg | Quote |
| 1 CR | 127 | 57.1 | 121 | 184 | 1,450 | UNI DN 32 PN 16 | 22 kg | Quote |
| 1 1/2 CR | 297 | 134 | 282 | 431 | 1,450 | UNI DN 40 PN 16 | 48 kg | Quote |
| 2 CR | 503 | 226 | 478 | — | 950 | UNI DN 50 PN 16 | 64 kg | Quote |
| 2 1/2 CR | 754 | 339 | 716 | — | 950 | UNI DN 65 PN 16 | 72 kg | Quote |
| 3 CR | 1,005 | 452 | 955 | — | 950 | UNI DN 80 PN 16 | 85 kg | Quote |
| 4 CR | 1,910 | 859 | 1,814 | — | 950 | UNI DN 100 PN 16 | 220 kg | Quote |
| 6 CR | 2,960 | 1,332 | — | — | 750 | UNI DN 150 PN 16 | 290 kg | Quote |
Theoretical flow rates from the catalogue. Each model runs up to the speed shown, depending on the viscosity of the fluid; the dash means the speed is above the model's maximum. The real flow is partly affected by discharge pressure: minimally with viscous fluids, more with thin and volatile ones.
Send us your fluid data: we reply within 24 hours with the right pump.