Technical reply within 24 hours WhatsApp IT

Resins

Epoxy resin pump

Liquid epoxy resins are thick at room temperature and thin out quickly when warmed, so viscosity must be checked at the real working temperature. They are pumped to mixers, reactors and two-component systems together with the hardener, which is handled by its own pump.

  • Made in Bologna since 1955
  • Self-priming and reversible pumps
  • Technical answer, not a sales pitch
  • Technical reply within 24 hours

Quote for a epoxy resin pump

Technical reply within 24 hours

Add technical details (optional)

Technical reply within 24 hours. No obligation.

What makes epoxy resin demanding to pump

Send us the data of your epoxy resin: we reply within 24 hours with the right pump.

Recommended configuration

Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines; Series CR when the product must be kept hot.

Recommended seriesSeries NAV, Series ZV, Series CR
Flow range of these series0.47 – 4,292 l/min (450–1,450 rpm)
Pump bodyCast iron; stainless steel where required
HeatingNot needed in normal conditions; to be considered if viscosity rises too much in the cold
Rotation speedLow, towards 450 rpm
Shaft sealChosen on the safety data sheet
ATEXOn request
ConnectionsNAV: UNI flanges DN 40–DN 125 PN 16
ZV: threaded, flanged to the motor
CR: per model, with jacket connections
Direction of rotationReversible

Indicative configuration: we confirm it on your viscosity, temperature, flow and pressure data.

Send us the data of your epoxy resin: we reply within 24 hours with the right pump.

Where it is used

Data we need for the quote

  1. Fluid and, if available, its technical or safety data sheet
  2. Required flow rate (l/min or m³/h)
  3. Viscosity at the lowest working temperature
  4. Discharge pressure and suction conditions
  5. Mains voltage and frequency (50/60 Hz)

Only the fluid, flow and your email are required: we can complete the rest together.

Send us the data of your epoxy resin: we reply within 24 hours with the right pump.

Frequently asked questions

Which pump do you recommend for epoxy resin?

An external gear pump: Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines; Series CR when the product must be kept hot. The final configuration depends on viscosity, temperature, flow and pressure.

Can the pump deliver an exact quantity?

The inverter lets the pump reach the desired instantaneous flow by varying its speed. Delivering a precise quantity and stopping at the right moment is done by the plant control system.

Is the pump reversible?

Yes, NAV, ZV and CR pumps can run in both directions: useful for emptying lines back into the tank.

How quickly do you reply?

Within 24 hours, with the recommended pump, configuration and price. You can also write to us on WhatsApp.

Related fluids

Technical reply within 24 hours

Quote for a epoxy resin pump

Fill in the four required fields: our engineers in Bologna reply within 24 hours with the recommended pump, configuration and price. Technical details and the data sheet help, but are optional.

  • Made in Bologna since 1955
  • Self-priming and reversible pumps
  • Technical answer, not a sales pitch
  • Technical reply within 24 hours
Add technical details (optional)

Technical reply within 24 hours. No obligation.

Quote WhatsApp