
Construction
- Self-priming and reversible.
- Threaded ports; flanged directly to the electric motor, no baseplate.
- Gears ground to tight tolerances for a steady flow at low speed.
- Ten models from 1.05 to 70.7 cm³/rev.
Typical fluids
Catalyst, Resin additives, Colorants and pigment pastes, Ink, Isocyanate, Polyol, Silicone.
Send us your fluid data: we reply within 24 hours with the right pump.
The models
Model table
| Model | Displacement cm³/rev | l/min at 450 rpm | l/min at 950 rpm | l/min at 1,450 rpm | Max rpm | Connections | Weight | |
|---|---|---|---|---|---|---|---|---|
| 1 ZV | 1.05 | 0.47 | 1 | 1.52 | 1,450 | threaded | — | Quote |
| 2 ZV | 2.1 | 0.94 | 2 | 3.04 | 1,450 | threaded | — | Quote |
| 4 ZV | 4.15 | 1.87 | 3.94 | 6.02 | 1,450 | threaded | — | Quote |
| 8 ZV | 8.3 | 3.73 | 7.9 | 12.0 | 1,450 | threaded | — | Quote |
| 12 ZV | 12.1 | 5.44 | 11.5 | 17.5 | 1,450 | threaded | — | Quote |
| 16 ZV | 16.4 | 7.02 | 14.8 | 22.6 | 1,450 | threaded | — | Quote |
| 20 ZV | 20.4 | 8.73 | 18.4 | 28.1 | 1,450 | threaded | — | Quote |
| 32 ZV | 32.3 | 14.5 | 30.7 | 46.8 | 1,450 | threaded | — | Quote |
| 50 ZV | 50.4 | 22.7 | 47.9 | 73.1 | 1,450 | threaded | — | Quote |
| 70 ZV | 70.7 | 31.8 | 67.2 | 102 | 1,450 | threaded | — | Quote |
Theoretical flow rates from the catalogue. Each model runs up to the speed shown, depending on the viscosity of the fluid; the dash means the speed is above the model's maximum. The real flow is partly affected by discharge pressure: minimally with viscous fluids, more with thin and volatile ones.
Send us your fluid data: we reply within 24 hours with the right pump.
1 ZV
2 ZV
4 ZV
8 ZV
12 ZV
16 ZV
20 ZV
50 ZV
70 ZV