What changes from one paint to another
- Water-based paints and latex are dispersions sensitive to shear: moderate speed.
- Solvent paints, enamels and inks release flammable vapours: compatible seals and ATEX check.
- Quartz and textured paints are abrasive: low speed and wear-resistant materials.
- Wall paints are thixotropic: sizing on viscosity at start-up.
Typical uses in a paint factory
drum and ibc unloading, feeding dispersers and mixers, filling lines and recirculation to keep pigments in suspension. The pump is reversible, so the same unit can also empty lines back into the tank.
Which series
Series NAV for transfer and recirculation, Series ZV for colorants, small circuits and ink feeding on presses.
Send us your fluid data: we reply within 24 hours with the right pump.
Fluids in this sector
Frequently asked questions
Which pump for paints, coatings & inks?
An external gear pump: self-priming, reversible, with a steady flow set by speed. The series depends on viscosity, temperature and flow.
How quickly do you reply?
Within 24 hours, with recommended pump, configuration and price.