Why a gear pump for resins
Resins are viscous and their viscosity changes a lot with temperature. A positive displacement gear pump moves a fixed volume at every revolution and keeps the flow steady as viscosity rises; for medium and high viscosity products it is practically the obligatory choice. Our pumps are self-priming and reversible, so the same unit can empty a drum and send the product back.
Typical configurations
- Transfer from tanks, drums and IBCs: Series NAV flanged pumps, cast iron or stainless steel.
- Small flows and additive feeding: Series ZV pumps flanged to the motor.
- Resins pumped hot, rosin and phthalic anhydride: Series CR with thermal oil jacket.
- Filled resins: low speed and abrasion-resistant materials.
Two-component resins
In two-component systems each component has its own pump. The gear pump provides a steady flow set by its speed through an inverter; delivering an exact quantity and stopping at the right moment is the job of the plant controller. See two-component systems.
Send us your fluid data: we reply within 24 hours with the right pump.
Fluids in this sector
Frequently asked questions
Which pump for resins?
An external gear pump: self-priming, reversible, with a steady flow set by speed. The series depends on viscosity, temperature and flow.
How quickly do you reply?
Within 24 hours, with recommended pump, configuration and price.