Technical reply within 24 hours WhatsApp IT

Resins

Filled resin pump

Resins loaded with mineral fillers such as calcium carbonate, silica or quartz are both viscous and abrasive. Low rotation speed and wear-conscious material choices extend the life of gears and bushings.

  • Made in Bologna since 1955
  • ISO 9001:2015 certified · ATEX available
  • Self-priming and reversible pumps
  • Technical reply within 24 hours

Quote for a filled resin pump

Technical reply within 24 hours

Add technical details (optional)

Technical reply within 24 hours. No obligation.

What makes filled resin demanding to pump

Send us the data of your filled resin: we reply within 24 hours with the right pump.

Recommended configuration

Series NAV pump for filled resin

Series NAV for transfer and larger flows; Series CR when the product must be kept hot.

Recommended seriesSeries NAV, Series CR
Flow range of these series14.5 – 2,770 l/min (450 rpm up to each model's maximum speed)
Pump bodyCast iron; stainless steel where required
HeatingNot needed in normal conditions; to be considered if viscosity rises too much in the cold
Rotation speedLow, towards 450 rpm
Shaft sealResistant to abrasion
ATEXOn request (zones 1, 2, 21, 22)
ConnectionsNAV: UNI flanges DN 40–DN 125 PN 16
CR: per model, with jacket connections
Direction of rotationReversible

Indicative configuration: we confirm it on your viscosity, temperature, flow and pressure data.

Send us the data of your filled resin: we reply within 24 hours with the right pump.

Where it is used

Data we need for the quote

  1. Fluid and, if available, its technical or safety data sheet
  2. Required flow rate (l/min or m³/h)
  3. Viscosity at the lowest working temperature
  4. Discharge pressure and suction conditions
  5. Mains voltage and frequency (50/60 Hz)

Only the fluid, flow and your email are required: we can complete the rest together.

Send us the data of your filled resin: we reply within 24 hours with the right pump.

Frequently asked questions

Which pump do you recommend for filled resin?

An external gear pump: Series NAV for transfer and larger flows; Series CR when the product must be kept hot. The final configuration depends on viscosity, temperature, flow and pressure.

How do you limit wear with fillers?

By choosing a larger pump that runs slowly instead of a small one at high speed, and with abrasion-resistant materials.

Is the pump reversible?

Yes, NAV, ZV and CR pumps can run in both directions: useful for emptying lines back into the tank.

How quickly do you reply?

Within 24 hours, with the recommended pump, configuration and price. You can also write to us on WhatsApp.

Related fluids

Technical reply within 24 hours

Quote for a filled resin pump

Fill in the four required fields: our engineers in Bologna reply within 24 hours with the recommended pump, configuration and price. Technical details and the data sheet help, but are optional.

  • Made in Bologna since 1955
  • ISO 9001:2015 certified · ATEX available
  • Self-priming and reversible pumps
  • Technical reply within 24 hours
Add technical details (optional)

Technical reply within 24 hours. No obligation.

Quote WhatsApp