What makes hot-melt demanding to pump
- Sets at room temperature: the pump must be hot before start-up and stay at temperature while working.
- High viscosity, which rises further in the cold: the pump is sized on the viscosity at the lowest working temperature.
Send us the data of your hot-melt: we reply within 24 hours with the right pump.
Recommended configuration
Series CR when the product must be kept hot; Series ZV for small flows and machine-side lines.
| Recommended series | Series CR, Series ZV |
|---|---|
| Flow range of these series | 0.47 – 4,292 l/min (450–1,450 rpm) |
| Pump body | Cast iron; stainless steel where required |
| Heating | Thermal oil jacket (CR series) or electric cartridges |
| Rotation speed | Low, towards 450 rpm |
| Shaft seal | Suited to the working temperature |
| ATEX | On request |
| Connections | CR: per model, with jacket connections ZV: threaded, flanged to the motor |
| Direction of rotation | Reversible |
Indicative configuration: we confirm it on your viscosity, temperature, flow and pressure data.
Send us the data of your hot-melt: we reply within 24 hours with the right pump.
Where it is used
This page also covers: Hot Melt, Hot melt e solvente.
Data we need for the quote
- Fluid and, if available, its technical or safety data sheet
- Required flow rate (l/min or m³/h)
- Viscosity at the lowest working temperature
- Discharge pressure and suction conditions
- Mains voltage and frequency (50/60 Hz)
Only the fluid, flow and your email are required: we can complete the rest together.
Send us the data of your hot-melt: we reply within 24 hours with the right pump.
Frequently asked questions
Which pump do you recommend for hot-melt?
Does the pump have to be heated?
Yes. With a CR thermal oil jacket or electric cartridges the pump is brought to temperature before starting. Insulating it is certainly preferable, though not mandatory.
Is the pump reversible?
Yes, NAV, ZV and CR pumps can run in both directions: useful for emptying lines back into the tank.
How quickly do you reply?
Within 24 hours, with the recommended pump, configuration and price. You can also write to us on WhatsApp.