Technical reply within 24 hours WhatsApp IT

Paints, coatings & inks

Solvent-based paint pump

Solvent-based paints release flammable vapours, so seal compatibility and ATEX classification are the first points to check. The pump handles both the paint and the cleaning solvent used at colour changes.

  • Made in Bologna since 1955
  • Self-priming and reversible pumps
  • Technical answer, not a sales pitch
  • Technical reply within 24 hours

Quote for a solvent-based paint pump

Technical reply within 24 hours

Add technical details (optional)

Technical reply within 24 hours. No obligation.

What makes solvent-based paint demanding to pump

Send us the data of your solvent-based paint: we reply within 24 hours with the right pump.

Recommended configuration

Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines.

Recommended seriesSeries NAV, Series ZV
Flow range of these series0.47 – 2,770 l/min (450–1,450 rpm)
Pump bodyCast iron; stainless steel where required
HeatingNot needed in normal conditions; to be considered if viscosity rises too much in the cold
Rotation speedLow, towards 450 rpm
Shaft sealCompatible with the solvent
ATEXVerification required for classified areas
ConnectionsNAV: UNI flanges DN 40–DN 125 PN 16
ZV: threaded, flanged to the motor
Direction of rotationReversible

Indicative configuration: we confirm it on your viscosity, temperature, flow and pressure data.

Send us the data of your solvent-based paint: we reply within 24 hours with the right pump.

Where it is used

Data we need for the quote

  1. Fluid and, if available, its technical or safety data sheet
  2. Required flow rate (l/min or m³/h)
  3. Viscosity at the lowest working temperature
  4. Discharge pressure and suction conditions
  5. ATEX zone classification

Only the fluid, flow and your email are required: we can complete the rest together.

Send us the data of your solvent-based paint: we reply within 24 hours with the right pump.

Frequently asked questions

Which pump do you recommend for solvent-based paint?

An external gear pump: Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines. The final configuration depends on viscosity, temperature, flow and pressure.

Can the pump be installed in an ATEX area?

Tell us the zone classification and send the safety data sheet: we verify the configuration and the documentation the pump unit can be supplied with.

Is the pump reversible?

Yes, NAV, ZV and CR pumps can run in both directions: useful for emptying lines back into the tank.

How quickly do you reply?

Within 24 hours, with the recommended pump, configuration and price. You can also write to us on WhatsApp.

Related fluids

Technical reply within 24 hours

Quote for a solvent-based paint pump

Fill in the four required fields: our engineers in Bologna reply within 24 hours with the recommended pump, configuration and price. Technical details and the data sheet help, but are optional.

  • Made in Bologna since 1955
  • Self-priming and reversible pumps
  • Technical answer, not a sales pitch
  • Technical reply within 24 hours
Add technical details (optional)

Technical reply within 24 hours. No obligation.

Quote WhatsApp