What makes solvent demanding to pump
- Low viscosity, poor lubrication: the real flow is more affected by discharge pressure than with viscous fluids.
- Flammable vapours: compatible seals and verification of the ATEX classification of the area.
Send us the data of your solvent: we reply within 24 hours with the right pump.
Recommended configuration
Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines.
| Recommended series | Series NAV, Series ZV |
|---|---|
| Flow range of these series | 0.47 – 2,770 l/min (450–1,450 rpm) |
| Pump body | Cast iron; stainless steel where required |
| Heating | Not needed |
| Rotation speed | Checked against discharge pressure and suction |
| Shaft seal | Compatible with the solvent |
| ATEX | Verification required for classified areas |
| Connections | NAV: UNI flanges DN 40–DN 125 PN 16 ZV: threaded, flanged to the motor |
| Direction of rotation | Reversible |
Indicative configuration: we confirm it on your viscosity, temperature, flow and pressure data.
Send us the data of your solvent: we reply within 24 hours with the right pump.
Where it is used
This page also covers: Vernici e solventi, Acqua e solvente.
Data we need for the quote
- Fluid and, if available, its technical or safety data sheet
- Required flow rate (l/min or m³/h)
- Viscosity at the lowest working temperature
- Discharge pressure and suction conditions
- ATEX zone classification
Only the fluid, flow and your email are required: we can complete the rest together.
Send us the data of your solvent: we reply within 24 hours with the right pump.
Frequently asked questions
Which pump do you recommend for solvent?
An external gear pump: Series NAV for transfer and larger flows; Series ZV for small flows and machine-side lines. The final configuration depends on viscosity, temperature, flow and pressure.
Can the pump be installed in an ATEX area?
Tell us the zone classification and send the safety data sheet: we verify the configuration and the documentation the pump unit can be supplied with.
Does the flow change if discharge pressure rises?
With viscous fluids the reduction is minimal; with thin and volatile fluids like this one it is more significant, but not comparable to that of a centrifugal pump. We take it into account at sizing.
Is the pump reversible?
Yes, NAV, ZV and CR pumps can run in both directions: useful for emptying lines back into the tank.
How quickly do you reply?
Within 24 hours, with the recommended pump, configuration and price. You can also write to us on WhatsApp.